injection efficiency

英 [ɪnˈdʒekʃn ɪˈfɪʃnsi] 美 [ɪnˈdʒekʃn ɪˈfɪʃnsi]

n.  注射效率

计算机



双语例句

  1. Injection Efficiency of Direct Injection Mode Optical Sensors
    直接注入模式可见光和红外传感器的注入效率
  2. The injection part is provided with two needle bags so as to ensure better absorption effect of raw meat during injection and increase the injection efficiency.
    本机注射部分采用双针包设计,保证原料肉在一次注射过程中有更好的吸收效果,提高注射率。
  3. The effective filtering time is long, the cleaning time is reduced, and the water injection efficiency and the quality are improved.
    达到有效过滤时间长,清洗次数减少,提高了注水效率和质量。
  4. Design of IRFPA ROIC with High Injection Efficiency
    一种高注入效率红外焦平面读出电路采样单元的设计
  5. The injection efficiency of the ROIC is simulated by the computer.
    对读出电路的注入效率进行了计算机模拟。
  6. The Research of the Spin Injection Efficiency in Fe/ GaAs
    Fe/GaAs中自旋注入效率的研究
  7. Considering the priority of field electrons emission, the injection efficiency of electrons can be greatly improved in case that field emission cathode can be used as cathode in OLED structure.
    利用场致电子发射的优越性,将场致发射阴极作为阴极应用于OLED器件,可以大大提高电子的注入效率。
  8. The laser energy injection efficiency measurement for the half-cavity target
    强激光斜入射半腔靶能量注入率测量
  9. The experimental results show that CH plating hole targets have higher laser energy injection efficiency.
    实验结果表明:镀CH膜是增加激光能量注入率、提高腔靶辐射温度的有效方法。
  10. A novel variable optical attenuator based on SOI material was designed. The modulation area was formed of a special transverse PIN junction on a double-rib waveguide, which can enhance the overlap between the electric field and the optical field and accordingly increase the injection efficiency.
    设计了一种新型的、基于SOI材料的可调谐光衰减器,其调制区采用了独特的双脊型PIN结构,增强了注入电流场与光场的重叠,提高电注入效率。
  11. Expertise Diagnostic System on Improving Water Injection Efficiency
    提高注水系统效率的专家诊断系统
  12. A theoretical analysis of injection efficiency for ir-ccd
    红外CCD注入效率的理论分析
  13. The concept of the critical input resistance was put forward in this paper. Experiment indicates that the FPA will gain high injection efficiency only when the input resistance is lower than the critical value ( 106 Ω for GaN p-i-n detector).
    提出了临界输入阻抗的概念,实验表明,当电路的输入阻抗低于此临界值时(对于GaNp!i!n光伏探测器来说约为106Ω),焦平面才能获得较高的注入效率。
  14. It is instructive for steam injection for crude oil thermal recovery and analysing steam injection efficiency.
    这一成果对于指导油井现场注蒸汽热采,综合评价系统注汽效率具有一定的指导意义。
  15. Double Gate Cell with Double Injected one-transistor dynamic access structure is proposed. Based on the change of potential, using the floating effect of SOI, it worked on the high injection efficiency and lowly read-out time.
    本文提出了双栅双注入单管动态存储单元结构,该结构器件的工作基于势的变化,利用SOI的浮体效应,通过双注入来提高注入效率和减少读取时间。
  16. Laboratory research shows that the JJ? 8 and JJ? 9 agent can reduce the alkalinity of the liquid and degree of formation damage made by the liquid, and raise steam injection efficiency.
    室内研究表明,JJ-8和JJ-9降碱剂可有效降低蒸汽凝析液的碱度,减轻蒸汽凝析液对地层的伤害程度,提高注汽效率。
  17. In this paper, jobs done aim at improving luminescence efficiency, on the basis of the injection efficiency of carriers, including electrons and holes.
    本课题工作以提高发光效率为目的,从提高载流子注入效率为出发点,着重解决电子和空穴的注入效率问题。
  18. In order to enhance steam injection efficiency, according to the analysis of lease injection production parameters, this paper raises that the boiler should work with small discharge capacity and high mass dryness fraction to ensure steam injection quality during early injection production period;
    为了提高注汽效果,通过对矿场注采参数的分析,提出了注采初期,锅炉要小排量,高干度送温,保证注汽质量;
  19. It is also shown that when the one-photon transition and the two-photon transition is balanced, the maximum current injection efficiency is achieved.
    还证明了只有当单光子跃迁和双光子跃迁相平衡时才能获得最大的电流注入效率。
  20. Electric detection of spin injection efficiency
    自旋注入效率的电学探测
  21. Has no close relation with the injection efficiency of the hot hole.
    与热空穴的注入效率没有明显的联系。
  22. A Fast and Easy Calculation Method of Oilfield Water Injection Efficiency
    一种快速简便的油田注水系统效率计算方法
  23. A new measure to improve laser energy injection efficiency
    提高腔靶激光能量注入率的新途径
  24. An integrative technology of sand-control and water-injection was presented to improve the injection efficiency and oil recovery.
    为了提高油田注水效率和原油采收率,研究了出砂油藏注水井防砂、注水一体化技术。
  25. It was shown that the device had high sample injection efficiency, Low memory effect and the precision was fairly good.
    经合成标样试验表明:装样、进样过程,ICP稳定,进样效率高,记忆效应小、方法精密度好。
  26. The injection controllers currently used in this field can't accurately control the dispensed volume and thus lead to the low injection efficiency and survival rate.
    目前,生物工程界普遍应用的手工注射控制器不能精确控制注射量,注射效率和成活率低下。
  27. PH of steam condensed liquid could be decreased to below 9. The field test showed JJ-8 and JJ-9 could increase steam injection efficiency by reducing the alkalinity of liquid and damage to formation caused by liquid.
    JJ-9用量为0.2%就可以将蒸汽凝析液的pH降低到9以下;现场应用时将JJ-8作为前置液,JJ-9伴蒸汽注入的优化注入方式,可持续降低蒸汽凝析液的碱性,效果良好。
  28. The traditional method is mainly focused on reducing barrier height between the cathode electrode and the organic layer to improve the electron injection efficiency, but this is a passive measure.
    传统的阴极修饰法是侧重降低电极和有机层之间的势垒来提高电子的注入效率,是一种被动措施。
  29. The main topic is the low efficiency for electron injection, thereby causing imbalance of carrier recombination, resulting in low efficiency of light-emitting device, so the aim of this thesis is to improve the electron injection efficiency and luminous efficiency of the device.
    本课题主要是针对电子注入效率低引起的载流子复合不平衡,最终影响器件的发光效率这一问题,而进行的研究工作,主要目的就是提高器件的电子注入效率。
  30. Water injection efficiency depends on whether the injection pressure is high or low in water injection wells.
    注水井注水压力的高低直接影响水井的注水效率。